CyberData 011098 V2 SIP-Enabled VoIP PoE Ceiling Speaker

CyberData 011098 V2 SIP-Enabled VoIP PoE Ceiling Speaker

CyberData 011098 V2 SIP-Enabled VoIP PoE Ceiling Speaker

The CyberData SiP-enabled V2 Ceiling Speaker is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) public address loudspeaker that easily connects into existing local area networks with a single CAT5 cable connection. The speaker is compatible with most SIP-based IP PBX. In a non-SiP environment, the speaker is capable of playing audio from a multicast source. Its small footprint and low height allows the speaker to be discreetly mounted almost anywhere. The VoIP V2 Ceiling Speaker supports two SIP extensions. One extension can be assigned to a page group for auto answer paging. The second extension can be assigned to a “First-to-Answer” ring group with IP phones. An audio ring file is activated when the second SIP extension of the ceiling speaker is dialed. If any of the IP phones in the ring group is answered (or if the caller hangs up), the Ceiling Speaker stops ringing.

SIP (RFC 3261) compatible Simultaneous SIP and multicast Web-based configuration Paging prioritization Web-based firmware upgradeable Plenum-rated enclosure Autoprovisioning High efficiency speaker driver PoE 802.3af Enabled (Powered-over-Ethernet) DTMF-controlled relay Line-out connection Network and manual speaker volume control Can drive one external analog speaker for greater coverage User-uploadable ring and alert tones


Manufacturer

CyberData

Colour

Gray White