CyberData 011097 V2 SIP-Enabled VoIP PoE Loudspeaker Amplifier

CyberData 011097 V2 SIP-Enabled VoIP PoE Loudspeaker Amplifier

CyberData 011097 V2 SIP-Enabled VoIP PoE Loudspeaker Amplifier

The new CyberData V2 SIP-enabled VoIP Loudspeaker Amplifier provides an easy method for implementing an IP-based overhead paging system for both new and legacy installations. Now with up to 25 watts output (802.3at). With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line-out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Loudspeaker Amplifier can be configured to listen to multicast address and port number combinations to form paging zones. The VoIP V2 Loudspeaker Amplifier supports two SIP extensions. One extension can be assigned to a page group for auto answer paging. The second extension can be assigned to a “First-to-Answer” ring group with IP phones. An audio ring file is activated when the second SIP extension of the ceiling speaker is dialed. If any of the IP phones in the ring group is answered (or if the caller hangs up), the Loudspeaker Amplifier stops ringing.

* Loadspeaker must be purchased separately SIP and Simultaneous Multicast Dual-speed ethernet 10/100 Mbps Web-based configuration PoE 802.3at and 802.3af-enabled Line-in for background music Line-out connector DTMF controlled relay Direct 8 Ohm speaker drive User-uploadable tones and messages Digital and manual volume control Second SIP endpoint "Night Ringer" Autoprovisioning Auto-call voice message from input port sense


Manufacturer

CyberData

Service & Support

1 year

Colour

White