Bogen PCMTIM PCM Telephone Interface Module

Bogen PCMTIM PCM Telephone Interface Module

Bogen PCMTIM PCM Telephone Interface Module

The PCMTIM telephone interface module incorporates a universal interface so that connection to any telephone system is rapid and trouble-free. The module connects to the telephone system via a standard RJ11 plug and port type is selected simply by using slide switches. All other connections are made to built-in terminal blocks. Setup is also easy. Zone group programming, selection of all signaling functions, and all other parameters are set by simply dialing in with a touch-tone telephone. The telephone interface module is equipped with three RJ11 jacks for Override, Page Port/Trunk, and 90V Night Ring/Station. The Night Ringer feature can be activated from 90V ring signal or contact closure. The Page Port/Trunk jack can be used to program the system locally and provides 48V talk battery. The Override feature permits all-zone override paging from a dedicated telephone, trunk, or microphone (with suitable pre-amp). Protected by a 2-year manufacturer warranty.

Telephone Interface Module for the Bogen PCM2000 Zone Paging System. One module required per PCM2000 system. Connects to telephones via standard RJ11 plug Programmed by using common DIP switches All other connections made through built-in terminal blocks Zone group programming, selection of all signaling functions, and all other parameters set by dialing with touch-tone telephone Equipped with three RJ11 jacks for night ring, TEL line, and override


Manufacturer

Bogen

Service & Support

1 year

Colour

Black

Advanced Features

Night ringer feature activated from 90V ring signal or contact closure TEL line jack used to program system locally and provides 48V talk battery Override feature permits all-zone override paging from a dedicated telephone, trunk, or microphone (with suitable pre-amp)